| |
|
| |
|
 |
 |
|
emcoMP |
- Moisture Predictor |
|
| |
|
The measuring of the moisture, humidity or balance moisture is possible in dependence of the used sensor. |
|
The MP-Moisture Predictor is
a very exact gauge. As basic equipment it's equipped with the required standard identification lines for all sorts of applications in the paper industry. |
 |
| |
|
emcoMP |
- Measuring of the material moisture |
|
 |
|
|
|
 |
Measuring principle: |
dielectric |
|
|
Measuring range: |
0-25% water content, depending on sensor |
|
|
Measuring depth: |
30 mm |
|
|
Measuring: |
automatic with interval or manual |
|
|
Data transmission: |
RS232
interface, compatible with PC and printer |
|
|
Temperature compensation: |
automatic |
|
|
Response time: |
>2
seconds |
|
|
Measuring precision: |
<5% at a correct identification line |
|
|
|
|
emcoMP |
- external sensors |
|
|
|
|
|
|
|
MP - TS
|
Sword sensing device, for the measuring in stacks and rolls,
0 to 100% humidity, resolution 0,1%r.F./0,1C
Temperature -20 bis +85 °C,
Calibration +/-0,5% (25°C) |
|
|
MP - TB
|
Precision humidity temperature sensor,
0 to 100% humidity in balk goods and in the
surroundings air,
Calibration 0 to 100% +/- 1.5% humidity (25°C),
Temperature range -20 to 120 °C,
Calibration +/- 0,5% (25°C),
Sensor length 300mm stainless-steel-pipe, connection wire 3m |
|
|
MP - RS_30
|
Roll sensor, for the measuring of the moisture at running and stagnant rolls,
for the determination of moisture cross-sections, measuring depth
30mm, measuring breadth 70mm, temperature -10 to + 60 °C |
|
|
MP - BS
|
Bale sensor, for the measuring of the moisture in waste paper bales, measuring depth 500mm
(in the development) |
|
|
MP - HS
|
Hull sensor, for the measuring of the balance moisture
in thin-wall hulls |
|
|
[technical data] |
|
