emco Elektronische Mess- und Steuerungstechnik GmbH Robert Beltz Mommsenstrasse 2 04329 Leipzig Deutschland +49 341 27146-0

emco PTM 5 - Thickness measuring device

The emco PTM 5 is a battery-operated, electronic hand-held measuring instrument for determining the thickness of non-metallic materials such as paper, textiles, veneers, wood, leather, rubber, plastic and glass. The measuring conditions according to DIN EN 50981 and 50984 for determining the thickness of paper are guaranteed.

Features

  • Immediately ready for measurement, factory-adjusted
  • Measuring range from 0 to 5 mm
  • High measuring accuracy
  • Measurement at contact pressure of 100 ± 10 kPa
  • Simple zero adjustment against test plate
  • Display switchable between µm, mm and mils (1/1000 inch)
  • PTM 5-M with measuring value storage, RS232 and software
  • Adapted for continuous measurements

Applications

  • Thickness measurement for non-metallic materials such as paper, textiles, veneers, wood, leather, rubber, plastic and glass

ptm5-220_873.jpg

Brochure emco PTM 5


Technical data

Measuring range 0 - 5000 µm, 0 - 200 mil
Display of measured values selectable 0.0 - 999 in µm
1.00 - 5.00 in mm
0.00 - 200 in mil
Resolution selectable 0.1 µm in the range of 0 - 99.9 µm
1 µm in the range of 100 - 999 µm
0.01 mm in the range of 1.00 - 5.00 mm
0.01 mil in the range of 0.00 - 9.99 mil
0.1 mil in the range of 10.0 - 99.9 mil
1 mil in the range of 100 - 200 mil
Repeatability ±(5 µm + 5%)
Standard tolerance ±1 µm / ±0.06 mil
Minimum object size 10 mm x 10 mm
Temperature range (Storage) -10 °C - 60 °C
Temperature range (Operating) 0 °C - 60 °C
Probes single point
Power supply 9 Volt E Block alkaline
Dimension (LxWxH) 118 mm x 58 mm x 38 mm
Weight approx. 150 g incl. battery